Sandbox 1 Link (WIP and notes)

Killzone Series Weapons (WIP)

PK Machine Gun Variations

Additional images and info for the PK Machine Gun.

PK & PKM

PK 6P6 machine gun with 100-round drum - 7.62x54mm R. Note the larger curved gas block and the thicker fluted barrel.

PKM 6P6M machine gun - 7.62x54mm R. This has the classic (most commonly seen) version of the flash hider.

PKM 6P6M machine gun - 7.62x54mm R. This is the latest version of flash hider.

PKMN 6P6MN - 7.62x54mmR. Note in order to open the top cover with optics equipped, the dovetail has to be unlocked by pulling a spring loaded pin (seen sticking out near the back of the tray cover), which is held captive. This function was also used for the PKP Pecheneg-N's dovetail mount.

PKM modified with Blackheart International accessory kit - 7.62x54mm R

PKM with Zenitco furniture - 7.62x54mm R

PKP Pecheneg and bullpup conversion

PKP Pecheneg 6P41 with ammo box - 7.62x54mm R. Note the visible belt is fed through the gun; the PKP still feeds from right to left.

PKP Pecheneg-N 6P41N without ammo box and bipod folded - 7.62x54mm R

PKP Pecheneg with Zenit bullpup conversion kit - 7.62x54mm R

PKP Pecheneg Bullpup - 7.62x54mm R

PKP Pecheneg-SP

PKP Pecheneg-SP 6P69 without grip - 7.62x54mm R

PKP Pecheneg-SP 6P69 with scope - 7.62x54mm R

PKP Pecheneg-SP 6P69 without suppressor or grip - 7.62x54mm R

PKP Pecheneg-SP 6P69 with stock folded and without suppressor - 7.62x54mm R

PKP Pecheneg-SP 6P69 with fixed stock - 7.62x54mm R

AEK-999 "Barsuk"

AEK-999 "Barsuk" with PMS suppressor - 7.62x54mm R

PKS & PKMS

PKS 6P3 machine gun on a 6T2 Samojenkov tripod with 250-round ammo drum - 7.62x54mm R. Note the lack of a hinged shoulder strap on the stock and the fluted barrel; these differentiate the PK from the later PKM. This example is also seen with an earlier tripod without the modern tripod's belt box mount.

PKMS 6P3M mounted on a 6T2 Samojenkov tripod - 7.62x54mm R. Note the non-fluted barrel and updated PKM flash hider.

PKSN1 6P3N1 with 1PN34 NSPU Al'fa night vision scope - 7.62x54mmR

PKMS with Zenit furniture mounted on a 6T2 Samojenkov tripod - 7.62x54mm R

PKB & PKMB

PKB 6P10 - 7.62x54mm R. This is pretty much the same as the standard PK. The main defining factor of whether or not it is a PK or PKB is the mount.

PKMB 6P10M machine gun with 250-round ammo drum - 7.62x54mm R

PKMB 6P10M with drum holding basket folded and wooden stock - 7.62x54mm R

PKMB 6P10M - 7.62x54mmR

PKT & PKMT

PKT machine gun with solenoid trigger wire and 250-round ammo drum - 7.62x54mm R. This is the vehicle mounted version of the PK and is commonly seen in coaxial configuration. Note it lacks a conventional trigger and instead is either fired via the solenoid remote trigger or with the backup thumb trigger on top. Spade grips exist as well but were rarely fielded. Also note all PKT models lack the ammunition box mounting bracket which the standard PK series has.

PKT 6P7 with solenoid trigger wire - 7.62x54mm R

PKT with spade grips - 7.62x54mmR. These are usually seen on the BMD airborne tank and helicopter side guns. Foreign PK variants are sometimes modified to use these grips as well.

PKMT 6P7K with solenoid trigger wire - 7.62x54mm R. This is an updated version of PKT put into service in 1998 and more commonly seen. Note the conical flash hider.